Journal of Conservative Dentistry

ORIGINAL ARTICLE
Year
: 2015  |  Volume : 18  |  Issue : 4  |  Page : 292--296

Microstructure of cryogenically treated martensitic shape memory nickel-titanium alloy


Thilla Sekar Vinothkumar1, Deivanayagam Kandaswamy2, Gopalakrishnan Prabhakaran3, Arunachalam Rajadurai4 
1 Department of Restorative Dental Sciences, College of Dentistry, Jazan Universtiy, Jazan, Kingdom of Saudi Arabia
2 Department of Conservative Dentistry and Endodontics, Faculty of Dental Sciences, Sri Ramachandra University, Chennai, Tamil Nadu, India
3 Department of Mechanical Engineering, Velammal Engineering College, Chennai, Tamil Nadu, India
4 Department of Production Technology, MIT Campus, Anna University, Chennai, Tamil Nadu, India

Correspondence Address:
Dr. Thilla Sekar Vinothkumar
MDS, Assistant Professor, Department of Restorative Dental Sciences, College of Dentistry, Jazan Universtiy, Jazan
Kingdom of Saudi Arabia

Context: Recent introduction of shape memory (SM) nickel-titanium (NiTi) alloy into endodontics is a major breakthrough. Although the flexibility of these instruments was enhanced, fracture of rotary endodontic instruments during instrumentation is an important challenge for the operator. Implementation of supplementary manufacturing methods that would improve the fatigue life of the instrument is desirable. Aim: The purpose of this study was to investigate the role of dry cryogenic treatment (CT) conditions on the microstructure of martensitic SM NiTi alloy. Materials and Methods: Experiments were conducted on Ni-51 wt% Ti-49 wt% SM alloy. Five cylindrical specimens and five sheet specimens were subjected to different CT conditions: Deep CT (DCT) 24 group: −185°C; 24 h, DCT 6 group: −185°C; 6 h, shallow CT (SCT) 24 group: −80°C, 24 h, SCT 6 group: −80°C, 6 h and control group. Microstructure of surface was observed on cylindrical specimens with an optical microscope and scanning electron microscope at different magnifications. Subsurface structure was analyzed on sheet specimens using X-ray diffraction (XRD). Results: Microstructures of all SM NiTi specimens had equiaxed grains (approximately 25 μm) with well-defined boundaries and precipitates. XRD patterns of cryogenically treated specimens revealed accentuation of austenite and martensite peaks. The volume of martensite and its crystallite size was relatively more in DCT 24 specimen. Conclusions: DCT with 24 h soaking period increases the martensite content of the SM NiTi alloy without altering the grain size.


How to cite this article:
Vinothkumar TS, Kandaswamy D, Prabhakaran G, Rajadurai A. Microstructure of cryogenically treated martensitic shape memory nickel-titanium alloy.J Conserv Dent 2015;18:292-296


How to cite this URL:
Vinothkumar TS, Kandaswamy D, Prabhakaran G, Rajadurai A. Microstructure of cryogenically treated martensitic shape memory nickel-titanium alloy. J Conserv Dent [serial online] 2015 [cited 2021 Oct 27 ];18:292-296
Available from: https://www.jcd.org.in/article.asp?issn=0972-0707;year=2015;volume=18;issue=4;spage=292;epage=296;aulast=Vinothkumar;type=0